A reactive molecular dynamics model of thermal decomposition in polymers: I. Poly(methyl methacrylate)

The theory and implementation of reactive molecular dynamics (RMD) are presented. The capabilities of RMD and its potential use as a tool for investigating the mechanisms of thermal transformations in materials are demonstrated by presenting results from simulations of the thermal degradation of poly(methyl methacrylate) (PMMA). While it is known that depolymerization must be the major decomposition channel for PMMA, there are unanswered questions about the nature of the initiation reaction and the relative reactivities of the tertiary and primary radicals formed in the degradation process. The results of our RMD simulations, performed directly in the condensed phase, are consistent with available experimental information. They also provide new insights into the mechanism of the thermally induced conversion of this polymer into its constituent monomers.     

水解聚马来酸酐的微观阻垢机理研究

利用分子模拟方法优化了水解聚马来酸酐的构型,模拟了水解程度不同时各聚合物与碳酸钙晶体之间的相互作用,并计算了其作用能量和原子键距的变化。计算结果显示:所有阻垢剂分子均逐渐接近方解石晶体,阻垢剂分子链中的活性羧酸基团与Ca2 螯合,某些基团与Ca2 离子的键距越来越趋近,占据晶体的晶格生长点或嵌入晶体内部,同时分子结构存在小幅度的变形;说明该聚合物的阻垢机理是抑制晶体成核即抑制碳酸钙的长大,同时使晶体晶格扭曲畸变使垢松软。作用后动能、势能和总能量均有不同程度的降低,趋于更稳定的构型,并随着水解度的增大,阻垢作用更加明显。     

La-OMS-2催化剂催化甲苯氧化制苯甲醛

合成了氧化锰八面体(OMS-2)分子筛,采用离子交换法和浸渍法制备了稀土金属La改性的OMS-2分子筛(La-OMS-2)催化剂,并用于甲苯液相选择性氧化制苯甲醛,考察了催化剂用量、反应温度、反应时间、氧气流量及溶剂种类对甲苯转化率和苯甲醛选择性的影响,对La-OMS-2催化剂进行了X射线衍射表征和BET比表面积测定。实验结果表明,离子交换法制备的La-OMS-2-A催化剂的活性高于浸渍法制备的La-OMS-2-B催化剂,在甲苯0.1mol、溶剂冰乙酸10mL、氧气流量60mL/min、La-OMS-2-A催化剂用量0.10g、反应温度353K、反应时间1.0h的条件下,甲苯转化率达61%,苯甲醛收率为56%。加入La对OMS-2分子筛中的MnO晶格结构产生了影响,提高了苯甲醛的收率。     

凝胶过滤色谱测定高分子量聚乙烯醇分子量和分子量分布

用凝胶过滤色谱对高分子量聚乙烯醇分子量、分子量分布进行剖析。采用Plaquagel-OH色谱柱,0.25mol/LNaNO3,0.01mol/L Na2HPO4-NaH2PO,pH=7的缓冲溶液流动相,流速1ml/min,示差折光检测器,柱温30℃,聚环氧乙烷作标准物。该方法能显著缩短分析时间,提高准确性,可用于对高聚合度聚乙烯醇进行研究和指导生产。     

Photocatalytic degradation of 2,2‐bis(4‐hydroxy‐3‐methylphenyl) propane (BPP) based on molecular recognition interaction

BACKGROUND: Endocrine disruptors in the aquatic environment and their potential adverse effects are currently issues of concern. One of these endocrine disruptors is 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane (BPP). In this work the molecular recognition interaction of BPP with β‐cyclodextrin (β‐CD) was studied using IR spectroscopy and steady state fluorescence spectroscopy, and the photocatalytic degradation behaviour of BPP based on molecular recognition interaction was investigated in a TiO₂/UV–visible (λ_max = 365 nm) system. This might provide a new method for the treatment of some organic pollutants in wastewater. RESULTS: β‐CD reacts with BPP to form a 1:1 inclusion complex, the formation constant of which is 4.94 × 10³ L mol^?1. The photodegradation rate constant of BPP after molecular recognition by β‐CD showed a 1.42‐fold increase in the TiO₂/UV–visible (λ_max = 365 nm) system. The photodegradation of BPP depended on the concentration of β‐CD, the pH value, the gaseous medium and the initial concentration of BPP. The photodegradation efficiency of BPP with molecular recognition was higher than that without molecular recognition. After 100 min of irradiation the mineralisation efficiency of BPP after molecular recognition by β‐CD reached 94.8%, whereas the mineralisation efficiency of BPP before molecular recognition by β‐CD was only 40.6%. CONCLUSION: The photocatalytic degradation of BPP after molecular recognition by β‐CD can be enhanced in the TiO₂/UV‐visible (λ_max = 365 nm) system. This enhancement is dependent on the enhancement of the adsorption of BPP, the moderate inclusion depth of BPP in the β‐CD cavity and the increase in the frontier electron density of BPP after molecular recognition. Copyright © 2008 Society of Chemical Industry     

A Simple Experimental Technique to Measure Tortuosity in Packed Beds

In this article, a simple and inexpensive experimental technique easy to build in laboratory, for the measurement of tortuosity of a packed bed of inert particles, is described. Experimental values of the tortuosity were obtained with four different packed beds of sand. The experimental results obtained are in good agreement with the theoretical values of tortuosity in a porous media; and the data reported showed the tortuosity to increase with decrease in the void fraction of the packed bed as expected.     

Preparation and characterization of metal-complex imprinted PVDF hollow fiber membranes

Using nickel-2,2′-dipyridyl complex as a template, N-vinyl-2-pyrrolidone as the metal coordination functional monomer, and ethylene glycol dimethacrylate as the crosslinker, polyvinylidene fluoride (PVDF) hollow fiber ultrafiltration membrane as the supported membrane, metal complex imprinted polymeric membranes were prepared. The association constant of template-monomer interaction in the prepolymerization solution was estimated to be 4.38 × 10⁴ (L/mol)² by spectrophotometric titration analysis. The attenuated total reflection Fourier transform infrared spectroscopy and scanning electron micrograph characterization indicated that the surface of the support PVDF membrane was completely coated by the imprinted polymer layer after modification. The imprinted membranes exhibited the selective permeability for the template in certain nickel acetate solution. The molecularly imprinted membranes gave higher permeation separation factors at about pH 6, whereas increasing pressure would lower the separation ability. The effects of ion concentration, cations and counterions, ligand selectivity, pH, and trans-membrane pressure were investigated and the permeation performances of the imprinted membranes could be regarded as facilitated transport mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Intercalated clays from pentaerythritol stearate for use in polymer nanocomposites

Smectite clays treated with quaternary ammonium salts have been utilized for decades in paints, greases, cosmetics, and personal care products as rheological modifiers. They have also been used in industrial wastewater treatment extensively. In more recent times these surface modified clays have demonstrated benefits in polymer/clay nanocomposites. The use of quaternary ammonium modifiers limits the usefulness of these composites in food packaging because they are not approved for direct food contact. It would be advantageous to have surface modifying chemicals acceptable for direct food contact in these composites. This article reports research conducted on a promising surface modifier pentaerythritol stearate (PS), which is approved by the FDA for inclusion in food as a preservative. The surface modification of montmorillonite with PS is reported in detail as well as the production of nanocomposites with selected polymers made with the modified clay. Molecular modeling and purification of commercial PS samples indicate that the mono‐ and diesters are the critical surface modifiers, although the as received commercial material works well in forming intercalated clay complexes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

钛硅分子筛催化环己酮氨肟化反应过程--本征动力学

对钛硅分子筛(HTS)催化环己酮氨肟化反应本征动力学进行了研究。利用经验方程拟合了试验数据，并采用Marquardt算法对经验方程的参数进行确定，获得了不同试验条件下的反应初速率，然后再用高斯-牛顿法对本征动力学模型进行了参数估计，得出了氨肟化反应以及该反应体系中H2O2分解的本征动力学。并对该模型进行了残差分析和F检验，对氨肟化反应和H2O2分解的动力学模型的计算值与试验值进行了比较，获得相对误差绝对值的平均值分别为5．21％和6．25％。表明该模型能真实反映HTS催化环己酮氨肟化的反应特性，是合理可靠的，能为进一步的过程开发与工程设计提供一些理论上的指导和设计上的依据；而H2O2分解副反应动力学模型仅适用于该反应体系。     

最大重迭对称性分子轨道和分子几何参数计算

建立了AMl级别的最大重迭对称性分子轨道计算方案(MOSMO)。采用通常的半经验分子轨道方法AMl级别中完全相同的参数，计算了各种分子的几何参数等。所得计算结果与实验值及HF／6-31G*从头算方法计算结果相符，说明提出的计算方案是可行的。同时，由于提出的计算方案过程简单，更易推广使用到从头算方法难以解决的大分子体系和超分子体系的结构和性质研究。